AOG

AOG-Service for

  • Ni-Cad
  • Sealed Lead Acid
  • Dry Charged

Aviation Batteries and Spare Parts

How may we help?

Contact us by email or phone. We're happy to assist you with any questions about specific products and services.

Trickle Charging for Long-Term Storage or Standby for Aviation Ni-Cad Batteries

This product is sometimes used for long term overcharging where a battery must be kept in a "standby" condition. The customary practice is to fully charge the battery either by constant potential or constant current means, then maintain the battery in a fully charged condition by trickle charging, thus compensation for the normal self-discharge that occurs in the battery. Batteries on standby charge must be regularly checked to ensure adequate electrolyte levels.

Part NumberTypeManufacturerRFQ
DC-TC60 EU Trickle Charger D+C SELECT
DC-TC60 QD Trickle Charger D+C SELECT
DC-TC60 US Trickle Charger D+C SELECT

Specification:

  • Input voltage: 110V - 250V AC 50/60 Hz
  • Output voltage: approx. 32V DC
  • Output current: 1mA - 180mA

Included are:

  • 1 Trickle-Charger (P/N: DC-TC 60)
  • 1 charging cable (P/N: DC-LK-A4-120-20-4)
  • 1 clip black (P/N: 932 435-100)
  • 1 clip red (P/N: 932 435-101)
  • 1 Operation Instuction (P/N: DC-TC-60/ENG)

Optional:

  • Cable with Quickdisconnect

Made in Germany

Charger and Trickle-Charger for Ni-Cd and Ni-MH Cells and Packs

An innovative way of charging, ensures an optimal charging procedure out of each state of charge up to the maximum capacity and maintenance of charge. The uncomplicated construction without setting the voltage or the current makes it easy for everybody, even if not very familiar with the handling of technical equipments. The battery has only to be connected by adapter to the electronic part.

Part NumberTypeManufacturerRFQ
DC-CTC24 Lade-/Frischhaltegerät D+C SELECT

Description: charging-trickle charging

The charging current is interrupted by discharge pulses and phases of measurement . The cells are measured permanently until they have received their maximum voltage (ÄU Charging process). The charging current will be switched off and the cells have a resting phase of 12 – 20 hours. After that, a new phase of charging will be made. Through the charging current, oxygen bubbles at the electrodes are generated, which will be dissolved and re-combined through the discharge pulses. The formation of macro-grained crystals will be avoided through this chemical active substance. The cells keep their capacity and the internal resistance of cells does not rise. A pre-discharging is not necessary with this charging process. The memory effect will not become possible and the cells will not be overcharged.

Description of device

The electronic part for charging and trickle charging (for 1 to 24 cells) is programmed on an Eurocard. The Eurocard is fitted with a power-supply transformer and designed as a tray, suitable for a 19“ housing. Inside of a 19“ housing there can be installed up to 6 electronic trays. The battery-cells or packs with several cells are connected through an adapter to the device. In the plug of the connecting cable, the charging current is adjusted through bridges. The actual operation-status is shown by the respective LED’s.

Installation and operation of the device

The device is designed for the operation in dry rooms only. It should be protected from direct sunlight and high temperatures. For a ventilation to cool the electronic part, the louvers must be kept free. The device is to be connected according to the instructions on the type label.

Made in Germany

Trickle Charging for Long-Term Storage or Standby for Sealed and Wet Lead-Acid Aviation Batteries

This procdure is sometimes used for long term overcharging where a battery must be kept in a "standby" condition. The customary practice is to fully charge the battery either by constant potential or constant current means, then maintain the battery in a fully charged condition by trickle charging, thus compensation for the normal self-discharge that occurs in the battery. Batteries on standby charge must be regularly checked to ensure adequate electrolyte levels.

Part NumberTypeManufacturerRFQ
DC-TC80 DC-TC80 D+C SELECT

Automatic trickle-charger (charger) for sealed and wet lead acid aviation batteries 2V, 6V, 12V and 24V with the capacity range from 2,4 Ah to 50 Ah

Specification:

  • PRIMARI: 230 VAC ; 50 HZ ; 17W
  • SECONDARY: 2,3V - 27,6V ; 7,2VA max.
  • Trickle charging current approx 20 mA
voltage of chargingend of charging voltagecharging current
2 Volt2,3 V900 mA
6 Volt6,9 V700 mA
12 Volt13,8 V600 mA
24 Volt27,6 V300 mA

Included are:

  • 1 Trickle-Charger P/N DC-TC-80 with charging cable and clips

Optional:

  • Quickdisconnect

Made in Germany

  • +49 6105 9701 0
Request for Quote

Please enter a product type, a manufacturer or a part number.

General request

Selected Parts
Qty.